The truth is every new Android powered tablet /
smartphone device is normally installed with a
stock recovery image . The tool can be used by those who want to perform update operations,
backup procedures and maintenance and optimization tasks. Well, if you want to obtain even more from your phone, of if you want to tweak its performances, then you can anytime replace the stock recovery with a custom recovery image, like CWM recovery or TWRP recovery. Of course for the custom tools you will have to root your device first.
You boot into recovery mode, if you want to do the following...
==>Factory reset or system update your device
==>Load your boot.img or update it from SD Card
==>Update your system image or restore your back up from SD card.
==>Or perhaps if your device over misbehave and the only option you have left is to take it back to.genesis.
How to Enter Recovery Mode on Stubborn Android Devices
Usually you can boot into recovery mode by:
==>Turn off you device.
==>Then, reboot by pressing the Power and Volume Up buttons simultaneously.
==>Keep the buttons pressed for a short while – a few seconds – and then release the same.
==>The recovery mode menu should be displayed.
==>Note: on Samsung branded devices the recovery mode can be entered by pressing the Power, Volume Up and Home buttons at the same time.
But, if the above method didn’t work out well for
you, you can try the below
Method 1
1. You need to download an app on your smartphone.
2. So go to Google Play and download the Quick
Boot tool; use the link from here for accessing
the app.
3. Install the app on your phone / tablet.
4. Run the same.
5. You will be able to choose from: Recovery, Reboot, Bootloader and Power Off.
6. Choose Recovery.
7. Your device will reboot into recovery mode.
Method 2
1. On this method you will have to use ADB, so
the Android SDK and Fastboot must be installed
on your computer.
2. After installing the required tools (the one
mentioned above) connect your device with the
computer.
3. Use the USB cable for establishing the connection.
4. Then, on your computer navigate to the folder
where Fastboot and Android SDK is installed.
5. There open a Command Prompt window.
6. For cmd: press Shift key on your PC + Right-
click anywhere in the folder and choose “Open
Command Prompt”.
7. Then, in the cmd window enter: “adb reboot
recovery”.
8. Your smartphone / tablet will be automatically rebooted into recovery mode.
smartphone device is normally installed with a
stock recovery image . The tool can be used by those who want to perform update operations,
backup procedures and maintenance and optimization tasks. Well, if you want to obtain even more from your phone, of if you want to tweak its performances, then you can anytime replace the stock recovery with a custom recovery image, like CWM recovery or TWRP recovery. Of course for the custom tools you will have to root your device first.
You boot into recovery mode, if you want to do the following...
==>Factory reset or system update your device
==>Load your boot.img or update it from SD Card
==>Update your system image or restore your back up from SD card.
==>Or perhaps if your device over misbehave and the only option you have left is to take it back to.genesis.
Usually you can boot into recovery mode by:
==>Turn off you device.
==>Then, reboot by pressing the Power and Volume Up buttons simultaneously.
==>Keep the buttons pressed for a short while – a few seconds – and then release the same.
==>The recovery mode menu should be displayed.
==>Note: on Samsung branded devices the recovery mode can be entered by pressing the Power, Volume Up and Home buttons at the same time.
But, if the above method didn’t work out well for
you, you can try the below
Method 1
1. You need to download an app on your smartphone.
2. So go to Google Play and download the Quick
Boot tool; use the link from here for accessing
the app.
3. Install the app on your phone / tablet.
4. Run the same.
5. You will be able to choose from: Recovery, Reboot, Bootloader and Power Off.
6. Choose Recovery.
7. Your device will reboot into recovery mode.
Method 2
1. On this method you will have to use ADB, so
the Android SDK and Fastboot must be installed
on your computer.
2. After installing the required tools (the one
mentioned above) connect your device with the
computer.
3. Use the USB cable for establishing the connection.
4. Then, on your computer navigate to the folder
where Fastboot and Android SDK is installed.
5. There open a Command Prompt window.
6. For cmd: press Shift key on your PC + Right-
click anywhere in the folder and choose “Open
Command Prompt”.
7. Then, in the cmd window enter: “adb reboot
recovery”.
8. Your smartphone / tablet will be automatically rebooted into recovery mode.
